56 Command Groups
Data Center Bridging
DHCP l2 Relay
Command Description Mode*
clear priority-flow-control statistics Clears all or interface Priority-Flow-Control statistics. PE
datacenter-bridging Enters the Data Center Bridging mode. IC
priority-flow-control mode on Enables Priority-Flow-Control (PFC) on an interface. DCB
priority-flow-control priority Enables the priority group for lossless behavior (PFC
enabled).
DCB
show interfaces datacenter-
bridging
Displays the datacenter-bridging configuration, status and
counters for a given interface.
PE
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
Command Description Mode*
dhcp l2relay Enables the Layer 2 DHCP Relay agent for an interface. GC/IC
dhcp l2relay circuit-id Enables user to set the DHCP Option 82 Circuit ID for a
VLAN.
GC
dhcp l2relay remote-id Enables user to set the DHCP Option 82 Remote ID for a
VLAN.
GC
dhcp l2relay vlan Enables the L2 DHCP Relay agent for a set of VLANs. GC
dhcp l2relay trust Configures an interface to trust a received DHCP
Option 82.
IC
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
To Next Page
Loading...
