60 Command Groups
GVRP
IGMP Snooping
Command Description Mode*
clear gvrp statistics Clears all the GVRP statistics information. PE
garp timer Adjusts the GARP application join, leave, and leaveall
GARP timer values.
IC
gvrp enable (global) Enables GVRP globally. GC
gvrp enable (interface) Enables GVRP on an interface. IC
gvrp registration-forbid De-registers all VLANs, and prevents dynamic VLAN
registration on the port.
IC
gvrp vlan-creation-forbid Enables or disables dynamic VLAN creation. IC
show gvrp configuration Displays GVRP configuration information,
including
timer values, whether GVRP and dynamic VLAN
creation is enabled, and which ports are running GVRP
PE
show gvrp error-statistics Displays GVRP error statistics. UE
show gvrp statistics Displays GVRP statistics. UE
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
Command Description Mode*
ip igmp snooping (Global) In Global Config mode, Enables Internet Group
Management Protocol (IGMP) snooping.
GC
ip igmp snooping (Interface) Enables Internet Group Management Protocol (IGMP)
snooping on a specific VLAN.
IC
ip igmp snooping host-time-out Configures the host-time-out. IC
ip igmp snooping leave-time-out Configures the leave-time-out. IC
ip igmp snooping mrouter-time-
out
Configures the mrouter-time-out. IC
show ip igmp snooping groups Displays Multicast groups learned by IGMP snooping. UE
show ip igmp snooping interface Displays IGMP snooping configuration. PE
show ip igmp snooping mrouter Displays information on dynamically learned Multicast
router interfaces.
PE
ip igmp snooping (VLAN) In VLAN Config mode, enables IGMP snooping on a
particular VLAN or on all interfaces participating in a
VLAN.
VLAN
To Next Page
Loading...
