Dell PowerConnect 8024 - Page 69

Command Groups 69
match ip dscp Adds to the specified class definition a match condition
based on the value of the IP DiffServ Code Point (DSCP)
field in a packet.
CMC
match ip precedence Adds to the specified class definition a match condition
based on the value of the IP.
CMC
match ip tos Adds to the specified class definition a match condition
based on the value of the IP TOS field in a packet.
CMC
match protocol Adds to the specified class definition a match condition
based on the value of the IP Protocol field in a packet using
a single keyword notation or a numeric value notation.
CMC
match source-address mac Adds to the specified class definition a match condition
based on the source MAC address of the packet.
CMC
match srcip Adds to the specified class definition a match condition
based on the source IP address of a packet.
CMC
match srcip6 Adds to the specified class definition a match condition
based on the source IPv6 address of a packet.
v6CMC
match srcl4port Adds to the specified class definition a match condition
based on the source layer 4 port of a packet using a single
keyword, a numeric notation, or a numeric range notation.
CMC
match vlan Adds to the specified class definition a match condition
based on the value of the layer 2 VLAN Identifier field.
CMC
mirror Mirrors all the data that matches the class defined to the
destination port specified
PCMC
police-simple Establishes the traffic policing style for the specified class. PCMC
policy-map Establishes a new DiffServ policy GC
redirect Specifies that all incoming packets for the associated traffic
stream are redirected to a specific egress interface (physical
port or port-channel).
PCMC
service-policy Attaches a policy to an interface in a particular direction. GC and
IC
show class-map Displays all configuration information for the specified
class.
PE
show classofservice dotlp-mapping Displays the current Dot1p (802.1p) priority mapping to
internal traffic classes for a specific interface.
PE
show classofservice ip-dscp-
mapping
Displays the current IP DSCP mapping to internal traffic
classes for a specific interface.
PE
Command Description Mode*