Dell PowerConnect 8024 - Page 70

70 Command Groups
RADIUS
show classofservice trust Displays the current trust mode setting for a specific
interface.
PE
show diffserv Displays the DiffServ General Status information. PE
show diffserv service interface
ethernet in
Displays policy service information for the specified
interface and direction.
PE
show diffserv service interface
port-channel in
Displays policy service information for the specified
interface and direction.
PE
show diffserv service brief Displays all interfaces in the system to which a DiffServ
policy has been attached.
PE
show interfaces cos-queue Displays the class-of-service queue configuration for the
specified interface.
PE
show policy-map Displays all configuration information for the specified
policy.
PE
show policy-map interface Displays policy-oriented statistics information for the
specified interface and direction
PE
show service-policy Displays a summary of policy-oriented statistics
information for all interfaces in the specified direction.
PE
traffic-shape Specifies the maximum transmission bandwidth limit for
the interface as a whole.
GC and
IC
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
Command Description Mode*
aaa accounting network default
start-stop group radius
Enables RADIUS accounting on the switch. GC
auth-port Sets the port number for authentication requests of
the designated radius server
.
R
deadtime Improves RADIUS response times when a server is
unavailable by causing the unavailable server to be skipped.
R
key
Sets the authentication and encryption key for all
RADIUS communications between the switch and the
RADIUS daemon
.
R
msgauth Enables the message authenticator attribute to be used for
the RADIUS Authenticating server being configured.
R
name Assigns a name to a RADIUS server. R
Command Description Mode*