Dell PowerConnect 8024 - Page 80

80 Command Groups
IGMP Proxy
ip igmp startup-query-count Sets the number of queries sent out on startup—at
intervals equal to the startup query interval for the
interface.
IC
ip igmp startup-query-interval Sets the interval between general queries sent at startup
on the interface.
IC
ip igmp version Configures the version of IGMP for an interface. IC
show ip igmp Displays system-wide IGMP information. PE
show ip igmp groups Displays the registered multicast groups on the interface. PE
show ip igmp interface Displays the IGMP information for the specified interface. PE
show ip igmp interface membership Displays the list of interfaces that have registered in the
multicast group.
PE
show ip igmp interface stats Displays the IGMP statistical information for the
interface.
PE
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
Command Description Mode*
ip igmp-proxy Enables the IGMP Proxy on the router. IC
ip igmp-proxy reset-status Resets the host interface status parameters of the IGMP
Proxy router.
IC
ip igmp-proxy unsolicited-report-
interval
Sets the unsolicited report interval for the IGMP Proxy
router.
IC
show ip igmp-proxy Displays a summary of the host interface status parameters. PE
show ip igmp-proxy interface Displays a detailed list of the host interface status
parameters.
PE
show ip igmp-proxy groups Displays a table of information about multicast groups that
IGMP Proxy reported.
PE
show ip igmp-proxy groups detail Displays complete information about multicast groups that
IGMP Proxy has reported.
PE
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
Command Description Mode*