Dell PowerConnect 8024 - Page 84

84 Command Groups
ipv6 mld query-max-response-time Sets MLD querier's maximum response time for the
interface.
IC
ipv6 mld router Enables MLD in the router in global configuration mode
and for a specific interface in interface configuration mode.
GC
IC
ipv6 mtu Sets the maximum transmission unit (MTU) size, in bytes,
of IPv6 packets on an interface.
IC
ipv6 nd dad attempts Sets the number of duplicate address detection probes
transmitted while doing neighbor discovery.
IC
ipv6 nt managed-config-flag Sets the “managed address configuration” flag in router
advertisements.
IC
ipv6 nd ns-interval Sets the interval between router advertisements for
advertised neighbor solicitations.
IC
ipv6 nd other-config-flag Sets the “other stateful configuration” flag in router
advertisements sent from the interface.
IC
ipv6 nd prefix Sets the IPv6 prefixes to include in the router
advertisement.
IC
ipv6 nd ra-interval Sets the transmission interval between router
advertisements.
IC
ipv6 nd ra-lifetime Sets the value that is placed in the Router Lifetime field of
the router advertisements sent from the interface.
IC
ipv6 nd reachable-time Sets the router advertisement time to consider a neighbor
reachable after neighbor discovery confirmation.
IC
ipv6 nd suppress-ra Suppresses router advertisement transmission on an
interface.
IC
ipv6 pimdm Enables PIM-DM Multicast Routing Mode across the
router in global configuration mode or on a specific routing
interface in interface mode.
GC
IC
ipv6 pimdm query-interval Configures the PIM-DM Hello Interval for the specified
router interface.
IC
ipv6 route Configures an IPv6 static route GC
ipv6 route distance Sets the default distance (preference) for static routes. GC
ipv6 unicast-routing Enables forwarding of IPv6 unicast datagrams. GC
ping ipv6 Determines whether another computer is on the network. PE
ping ipv6 interface Determines whether another computer is on the network
using Interface keyword.
PE
Command Description Mode*