Dell PowerConnect 8024 - Page 87

Command Groups 87
OSPF
show bridge multicast
address-table count
Displays statistical information about the entries in the
multicast address table.
PE
show ip mcast Displays the system-wide multicast information. PE
show ip mcast boundary Displays the system-wide multicast information. PE
show ip mcast interface Displays the multicast information for the specified
interface.
PE
show ip mcast mroute Displays a summary or all the details of the multicast table. PE
show ip mcast mroute group Displays the multicast configuration settings of entries in
the multicast mroute table.
PE
show ip mcast mroute source Displays the multicast configuration settings of entries in
the multicast mroute table.
PE
show ip mcast mroute static Displays all the static routes configured in the static mcast
table.
PE
show ip pimsm bsr Displays the bootstrap router (BSR) information. PE
show ip pimsm interface Displays interface config parameters. If no interface is
specified, all interfaces are displayed.
PE
show ip pimsm rp-hash Displays which rendezvous point (RP) is being selected for a
specified group.
PE
show ip pimsm rp mapping Displays all group-to-RP mappings of which the router is
aware (either configured or learned from the bootstrap
router).
PE
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
Command Description Mode*
area default-cost Configures the monetary default cost for the stub area. ROSPF
area nssa Configures the specified area ID to function as an NSSA. ROSPF
area nssa default-info-originate Configures the metric value and type for the default route
advertised into the NSSA.
ROSPF
area nssa no-redistribute Configures the NSSA Area Border router (ABR) so that
learned external routes are not redistributed to the NSSA.
ROSPF
area nssa no-summary Configures the NSSA so that summary LSAs are not
advertised into the NSSA.
ROSPF
area nssa translator-role Configures the translator role of the NSSA. ROSPF
area nssa translator-stab-intv Configures the translator stability interval of the NSSA. ROSPF
Command Description Mode*