Dell PowerConnect 8024 - Page 88

88 Command Groups
area range Creates a specified area range for a specified NSSA. ROSPF
area stub Creates a stub area for the specified area ID. ROSPF
area stub no-summary Prevents Summary LSAs from being advertised into the
NSSA.
ROSPF
area virtual-link Creates the OSPF virtual interface for the specified area-id
and neighbor router.
ROSPF
area virtual-link authentication Configures the authentication type and key for the OSPF
virtual interface identified by the area ID and neighbor ID.
ROSPF
area virtual-link dead-interval Configures the dead interval for the OSPF virtual interface
on the virtual interface identified by area-id and neighbor
router.
ROSPF
area virtual-link hello-interval Configures the hello interval for the OSPF virtual interface
on the virtual interface identified by the area ID and
neighbor ID.
ROSPF
area virtual-link retransmit-
interval
Configures the retransmit interval for the OSPF virtual
interface on the virtual interface identified by the area ID
and neighbor ID.
ROSPF
area virtual-link transmit-delay Configures the transmit delay for the OSPF virtual
interface on the virtual interface identified by the area ID
and neighbor ID.
ROSPF
auto-cost Allows user to change the reference bandwidth used in
computing link cost.
ROSPF
bandwidth Allows user to change the bandwidth used in computing
link cost.
IC
capability opaque Enables Opaque Capability on the router. RC
clear ip ospf Resets specific OSPF states. PE
default-information originate Controls the advertisement of default routes. ROSPF
default-metric Sets a default for the metric of distributed routes. ROSPF
distance ospf Sets the route preference value of OSPF in the router. ROSPF
distribute-list out Specifies the access list to filter routes received from the
source protocol.
ROSPF
enable Resets the default administrative mode of OSPF in the
router (active).
ROSPF
exit-overflow-interval Configures the exit overflow interval for OSPF. ROSPF
external-lsdb-limit Configures the external LSDB limit for OSPF. ROSPF
ip ospf area Enables OSPFv2 and sets the area ID of an interface. IC
Command Description Mode*