Dell PowerConnect 8024 - Page 93

Command Groups 93
PIM-DM
PIM-SM
show ipv6 ospf virtual-link brief Displays the OSPFV3 Virtual Interface information for all
areas in the system.
PE
trapflags Enables OSPF traps ROSV3
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
Command Description Mode*
ip pimdm Enables the administrative mode of PIM-DM in the router. GC
ip pimdm mode Sets administrative mode of PIM-DM on an interface to
enabled.
IC
ip pimdm query-interval Configures the transmission frequency of hello messages
between PIM enabled neighbors.
IC
show ip pimdm Displays system-wide information for PIM-DM. PE
show ip pimdm interface Displays interface information for PIM-DM on the
specified interface.
PE
show ip pimdm interface stats Displays the statistical information for PIM-DM on the
specified interface.
UE
show ip pimdm neighbor Displays the neighbor information for PIM-DM on the
specified interface.
PE
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
Command Description Mode*
ip pimsm Sets administrative mode of PIM-SM multicast routing
across the router to enabled.
GC
ip pimsm cbsrhasmasklength Configures the CBSR hash mask length to be advertised in
bootstrap messages for a particular PIM-SM interface.
IC
ip pimsm cbsrpreference Configures the CBSR preference for a particular PIM-SM
interface.
IC
ip pimsm crppreference Configures the Candidate Rendezvous Point (CRP) for a
particular PIM-SM interface.
IC
ip pimsm message-interval Configures the global join/prune interval for PIM-SM
router.
GC
ip pimsm mode Sets to enabled the administrative mode of PIM-SM
multicast routing on a routing interface.
IC
Command Description Mode*