Dell PowerConnect 8024 - Page 96

96 Command Groups
Tunnel Interface
Virtual Router Redundancy
Command Description Mode*
interface tunnel Enables the interface configuration mode for a tunnel. GC
show interface tunnel Displays the parameters related to tunnel such as tunnel
mode, tunnel source address and tunnel destination
address.
PE
tunnel destination Specifies the destination transport address of the tunnel. IC
tunnel mode ipv6ip Specifies the mode of the tunnel. IC
tunnel source Specifies the source transport address of the tunnel, either
explicitly or by reference to an interface.
IC
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
Command Description Mode*
ip vrrp Enables the administrative mode of VRRP for the router. GC
ip vrrp authentication Sets the authorization details value for the virtual router
configured on a specified interface.
IC
ip vrrp ip Sets the virtual router IP address value for an interface. IC
ip vrrp mode Enables the virtual router configured on an interface.
Enabling the status field starts a virtual router.
IC
ip vrrp preempt Sets the preemption mode value for the virtual router
configured on a specified interface.
IC
ip vrrp priority Sets the priority value for the virtual router configured on a
specified interface.
IC
ip vrrp timers advertise Sets the frequency, in seconds, that an interface on the
specified virtual router sends a virtual router advertisement.
IC
ip vrrp track interface Alters the priority of the VRRP router based on the
availability of its interfaces.
IC
ip vrrp track ip route Tracks route reachability. IC
show ip vrrp Displays whether VRRP functionality is enabled or disabled
on the switch.
PE
show ip vrrp interface Displays all configuration information and VRRP router
statistics of a virtual router configured on a specific
interface.
PE
show ip vrrp interface brief Displays information about each virtual router configured
on the switch.
PE