Cisco Sx350

Smartport Commands
1079 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
55
Command Mode
Interface (Ethernet, Port Channel) Configuration mode
Examples
Example 1 - Set the maximum number of kilobits per second of Broadcast traffic
on port 1 to 10000.
switchxxxxxx(config)# interface gi11
switchxxxxxx(config-if)# smartport storm-control broadcast kpbs 10000
Example 2 - Set the maximum percentage of kilobits per second of Broadcast
traffic on port 1 to 30%.
switchxxxxxx(config)# interface gi11
switchxxxxxx(config-if)# smartport storm-control broadcast level 30