Cisco Sx350

Spanning-Tree Commands
1129 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
58
Bridge ID Priority 36864
Address 00:02:4b:29:7a:00
Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
Interfaces
Name
---------
gi1 4
State
-------
Enabled
Prio.Nbr
------
128.4
Cost
-----
19
Sts
---
BLK
Role
----
Altn
PortFast
--------
No
Type
----------
Shared (STP)
switchxxxxxx# show spanning-tree detail
Spanning tree enabled mode RSTP
Default port cost method: long
Root ID Priority
Address
Path Cost
Root Port
32768
00:01:42:97:e0:00
20000
gi1 1
Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
Bridge ID Priority
Address
36864
00:02:4b:29:7a:00
Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
Number of topology changes 2 last change occurred 2d18h ago
Times: hold 1, topology change 35, notification 2
hello 2, max age 20, forward delay 15
Port 1 (
gi1 1) enabled
State: Forwarding
Port id: 128.1
Type: P2p (configured: auto) RSTP
Designated bridge Priority: 32768
Designated port id: 128.25
Guard root: Disabled
Role: Root
Port cost: 20000
Port Fast: No (configured:no)
Address: 00:01:42:97:e0:00
Designated path cost: 0
BPDU guard: Disabled
Number of transitions to forwarding state: 1
BPDU: sent 2, received 120638