Cisco Sx350

SYSLOG Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 1180
61
Command Mode
Privileged EXEC mode
Example
The following example displays the logging status and the SYSLOG messages
stored in the internal buffer.
switchxxxxxx# show logging
Logging is enabled.
Origin id: hostname
Console Logging: Level info. Console Messages: 0 Dropped.
Buffer Logging: Level info. Buffer Messages: 61 Logged, 61 Displayed, 200 Max.
File Logging: Level error. File Messages: 898 Logged, 64 Dropped.
4 messages were not logged
Application filtering control
Application Event Status
-------------------- ---------------- ---------
AAA Login Enabled
File system Copy Enabled
File system Delete-Rename Enabled
Management ACL Deny Enabled
Aggregation: Disabled.
Aggregation aging time: 300 Sec
01-Jan-2010 05:29:46 :%INIT-I-Startup: Warm Startup
01-Jan-2010 05:29:02 :%LINK-I-Up: Vlan 1
01-Jan-2010 05:29:02 :%LINK-I-Up:
SYSLOG 6
01-Jan-2010 05:29:02 :%LINK-I-Up:
SYSLOG 7
01-Jan-2010 05:29:00 :%LINK-W-Down:
SYSLOG 8