System Management Commands
1191 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
62
• power - Display the power supply status
• fan
—
Displays the fan status
• temperature status—Displays the temperature status
Command Mode
User EXEC mode
User Guidelines
The power parameters displays power supply information.
Main Power supply statuses:
• Active - power supply is used.
• Failure - Main power has failed.
PD
Power supply statuses:
• Active - power supply is used.
• Available - Power supply is connected but is not used.
• Not Connected - The PD port is not connected or not connected to PSE.
The fan and temperature status parameters are available only on devices on which
FAN and/or temperature sensor are installed.
Fan status can be one of:
• Fans OK, redundant fan Ready - The fan/s functions correctly.
• Fans OK, redundant fan Active - One of the fans failed and is backed-up by
the redundant fan.
• Fail - Several fans failed.
• N/A - No fan installed.
Sensor status can be one of:
• OK - The sensor/s functions correctly.
• Failure - The sensor/s failed.
• NA - No sensor is installed.
Temperature can be one of:
To Next Page
