Cisco Sx350

Address Table Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 160
4
User Guidelines
A MAC address can be displayed in IP format only if it is within the range
0100.5e00.0000 through 0100.5e7f.ffff.
Multicast router ports (defined statically or discovered dynamically) are members
in all MAC groups.
Ports that were defined via the bridge multicast forbidden forward-all command
are displayed in all forbidden MAC entries.
Changing the Multicast mode can move static Multicast addresses that are written
in the device FDB to a shadow configuration because of FDB hash collisions.
Example
The following example displays bridge Multicast address information.
switchxxxxxx# show bridge multicast address-table
Multicast address table for VLANs in MAC-GROUP bridging mode:
Vlan MAC Address Type Ports
---- ----------------- -------------- -----
8 01:00:5e:02:02:03 Static 1-2
Forbidden ports for Multicast addresses:
Vlan MAC Address Ports
---- ----------------- -----
8 01:00:5e:02:02:03 gi14
Multicast address table for VLANs in IPv4-GROUP bridging mode:
Vlan MAC Address Type Ports
---- ----------------- -------------- -----
1 224.0.0.251 Dynamic gi12
Forbidden ports for Multicast addresses:
Vlan MAC Address Ports
---- ----------------- -----
1 232.5.6.5
1 233.22.2.6