Cisco Sx350

EEE Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 378
16
Example 6 - The following is the information displayed when EEE is disabled on the
port.
switchxxxxxx# show eee gi11
Port Status: UP
EEE capabilities:
Speed 10M: EEE not supported
Speed 100M: EEE supported
Speed 1G: EEE supported
Speed 10G: EEE not supported
Current port speed: 1000Mbps
EEE Administrate status: disabled
EEE Operational status: disabled
EEE LLDP Administrate status: enabled
EEE LLDP Operational status: disabled
Example 7 - The following is the information displayed when EEE is running on the
port, and EEE LLDP is disabled.
switchxxxxxx# show eee gi12
Port Status: UP
EEE capabilities:
Speed 10M: EEE not supported
Speed 100M: EEE supported
Speed 1G: EEE supported
Speed 10G: EEE not supported
Current port speed: 1000Mbps
EEE Remote status: enabled
EEE Administrate status: enabled
EEE Operational status: enabled
EEE LLDP Administrate status: disabled
EEE LLDP Operational status: disabled
Resolved Tx Timer: 10usec
Local Tx Timer: 10 usec