Cisco Sx350

IPv6 Commands
605 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
28
Example 2. The following is sample output from the show ipv6 route command
when entered with the IPv6 prefix 2001:200::/35:
switchxxxxxx# show ipv6 static 2001:200::/35
IPv6 Static routes Code: * - installed in Routing Information Base (RIB)
IPv6 Static routes distance is 1
* 2001:200::/35, via nexthop 4000::1, metric 1
2001:200::/35, via nexthop 9999::1, metric 1
* 2001:200::/35, interface VLAN1, metric 1
Example 3. The following is sample output from the show ipv6 route command
when entered with the interface VLAN 1:
switchxxxxxx# show ipv6 static interface vlan 1
IPv6 Static routes Code: * - installed in Routing Information Base (RIB)
IPv6 Static routes distance is 1
* 5000::/16, interface VLAN1, metric 1
Example 4. The following is sample output from the show ipv6 route command
with the detail keyword:
switchxxxxxx# show ipv6 static detail
IPv6 Static routes Code: * - installed in Routing Information Base (RIB)
IPv6 Static routes distance is 1
* 3000::/16, interface VLAN1, metric 1
* 4000::/16, via nexthop 2001:1::1, metric 1
5000::/16, interface VLAN2, metric 1
Interface is down
* 5555::/16, via nexthop 4000::1, metric 1
5555::/16, via nexthop 9999::1, metric 1
Route does not fully resolve
* 5555::/16, via nexthop 4001:AF00::1, metric 1