Cisco Sx350

Link Layer Discovery Protocol (LLDP) Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 794
36
Power Source The power source utilized by a PSE or PD
device. A PSE device advertises its power
capability. The possible values are: Primary
power source, Backup power source.
Unknown Power source, PSE and local
power source, Local Only power source and
PSE only power source.
LLDP MED
Capabilities The sender's LLDP-MED capabilities.
Device type The device type. Indicates whether the
sender is a Network Connectivity Device or
Endpoint Device, and if an Endpoint, to which
Endpoint Class it belongs.
LLDP MED - Network Policy
Application type The primary function of the application
defined for this network policy.
Flags Flags. The possible values are:
Unknown policy: Policy is required by the
device, but is currently unknown.
Tagged VLAN: The specified application
type is using a tagged VLAN.
Untagged VLAN: The specified application
type is using an Untagged VLAN.
VLAN ID The VLAN identifier for the application.
Layer 2 priority The Layer 2 priority used for the specified
application.
DSCP The DSCP value used for the specified
application.
LLDP MED - Power Over Ethernet
Power type The device power type. The possible values
are: Power Sourcing Entity (PSE) or Power
Device (PD).
Power Source The power source utilized by a PSE or PD
device. A PSE device advertises its power
capability. The possible values are: Primary
power source and Backup power source. A
PD device advertises its power source. The
possible values are: Primary power, Local
power, Primary and Local power.
Field Description