Cisco Sx350

Link Layer Discovery Protocol (LLDP) Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 798
36
Power Source The power source utilized by a PSE or PD device. A
PSE device advertises its power capability. The
possible values are: Primary power source and
Backup power source. A PD device advertises its
power source. The possible values are: Primary
power, Local power, Primary and Local power.
Power priority The PD device priority. A PSE device advertises the
power priority configured for the port. A PD device
advertises the power priority configured for the
device. The possible values are: Critical, High and
Low.
Power value The total power in watts required by a PD device
from a PSE device, or the total power a PSE device
is capable of sourcing over a maximum length cable
based on its current configuration.
LLDP MED - Location
Coordinates, Civic
address, ECS ELIN.
The location information raw data.
Field Description