Dell PowerConnect 8024 - Page 108

108 Command Groups
member Configures the switch. SG
movemanagement Moves the Management Switch functionality from one
switch to another.
SG
no cut-through mode Disables the cut-through mode on the switch. GC
ping Sends ICMP echo request packets to another node on the
network.
UE
reload Reloads the operating system. PE
set description Associates a text description with a switch in the stack. SG
show boot-version Displays the boot image version details. UE
show cut-through mode Show the cut-through mode on the switch. PE
show memory cpu Checks the total and available RAM space on the switch. PE
show process cpu Checks the CPU utilization for each process currently
running on the switch.
PE
show sessions Displays a list of the open telnet sessions to remote hosts. PE
show stack-port Displays summary stack-port information for all interfaces. PE
show stack-port counters Displays summary data counter information for all
interfaces.
PE
show stack-port diag Displays front panel stacking diagnostics for each port. PE
show stack-standby Shows the Standby configured in the stack. UE
show supported switchtype Displays information about all supported switch types. UE
show switch Displays information about the switch status. UE
show switch chassis mgmt Shows the chassis slot of the IOMs in a stack PE
show system Displays system information. UE
show system id Displays the service ID information. UE
show system power Displays the power supply status. UE
show tech-support Displays system and configuration information (for
debugging/calls to technical support).
PE
show system temperature Displays the system temperature and fan status. UE
show users Displays information about the active users. PE
show version Displays the system version information. UE
stack Sets the mode to Stack Global Config. GC
standby Configures the standby in the stack. SG
Command Description Mode*