Dell PowerConnect 8024 - Page 90

90 Command Groups
OSPFv3
show ip ospf database database-
summary
Displays the number of each type of LSA in the database for
each area and for the router.
PE
show ip ospf interface Displays the information for the IFO object or virtual
interface tables.
PE
show ip ospf interface brief Displays brief information for the IFO object or virtual
interface tables.
PE
show ip ospf interface stats Displays the statistics for a specific interface. PE
show ip ospf neighbor Displays information about OSPF neighbors. PE
show ip ospf range Displays information about the area ranges for the specified
area-id.
PE
show ip ospf statistics Displays information about recent Shortest Path First (SPF)
calculations.
PE
show ip ospf stub table Displays the OSPF stub table. PE
show ip ospf virtual-link Displays the OSPF Virtual Interface information for a
specific area and neighbor.
PE
show ip ospf virtual-link brief Displays the OSPF Virtual Interface information for all
areas in the system.
PE
timers spf Configures the SPF delay and hold time. ROSPF
trapflags Enables OSPF traps. ROSPF
1583compatibility Enables OSPF 1583 compatibility. ROSPF
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
Command Description Mode*
area default-cost Configures the monetary default cost for the stub area. ROSV3
area nssa Configures the specified areaid to function as an NSSA. ROSV3
area nssa default-info-originate Configures the metric value and type for the default route
advertised into the NSSA.
ROSV3
area nssa no-redistribute Configures the NSSA ABR so that learned external routes
will not be redistributed to the NSSA.
ROSV3
area nssa no-summary Configures the NSSA so that summary LSAs are not
advertised into the NSSA.
ROSV3
area nssa translator-role Configures the translator role of the NSSA. ROSV3
Command Description Mode*