Dell PowerConnect 8024 - Page 91

Command Groups 91
area nssa translator-stab-intv Configures the translator stability interval of the NSSA. ROSV3
area range Creates an area range for a specified NSSA. ROSV3
area stub Creates a stub area for the specified area ID. ROSV3
area stub no-summary Disables the import of Summary LSAs for the stub area
identified by
areaid.
ROSV3
area virtual-link Creates the OSPF virtual interface for the specified areaid
and
neighbor .
ROSV3
area virtual-link dead-interval Configures the dead interval for the OSPF virtual interface
on the virtual interface identified by areaid and neighbor .
ROSV3
area virtual-link hello-interval Configures the hello interval for the OSPF virtual interface
on the virtual interface identified by areaid and neighbor .
ROSV3
area virtual-link retransmit-
interval
Configures the retransmit interval for the OSPF virtual
interface on the virtual interface identified by areaid and
neighbor .
ROSV3
area virtual-link transmit-delay Configures the transmit delay for the OSPF virtual
interface on the virtual interface identified by areaid and
neighbor .
ROSV3
default-information originate Controls the advertisement of default routes. ROSV3
default-metric Sets a default for the metric of distributed routes. ROSV3
distance ospf Sets the route preference value of OSPF in the router. ROSV3
enable Resets the default administrative mode of OSPF in the
router (active).
ROSV3
exit-overflow-interval Configures the exit overflow interval for OSPF. ROSV3
external-lsdb-limit Configures the external LSDB limit for OSPF. ROSV3
ipv6 ospf Enables OSPF on a router interface or loopback interface. IC
ipv6 ospf areaid Sets the OSPF area to which the specified router interface
belongs.
IC
ipv6 ospf cost Configures the cost on an OSPF interface. IC
ipv6 ospf dead-interval Sets the OSPF dead interval for the specified interface. IC
ipv6 ospf hello-interval Sets the OSPF hello interval for the specified interface. IC
ipv6 ospf mtu-ignore Disables OSPF maximum transmission unit (MTU)
mismatch detection.
IC
ipv6 ospf network Changes the default OSPF network type for the interface. IC
ipv6 ospf priority Sets the OSPF priority for the specified router interface. IC
Command Description Mode*