Managed Switch CLI Manual, Release 8.0.3
Switching Commands 3-93
v1.0, July 2010
lacp admin key
Use this command to configure the administrative value of the key for the port-channel. The value
range of <key> is 0 to 65535.
no lacp admin key
Use this command to configure the default administrative value of the key for the port-channel.
lacp collector max-delay
Use this command to configure the port-channel collector max delay. The valid range of <delay>
is 0-65535.
Default 0x8000
Format lacp admin key <key>
Mode Interface Config
Note: This command is only applicable to port-channel interfaces.
Format no lacp admin key
Mode Interface Config
Default 0x8000
Format lacp collector max-delay <delay>
Mode Interface Config
Note: This command is only applicable to port-channel interfaces.
To Next Page
Loading...
