Managed Switch CLI Manual, Release 8.0.3
Routing Commands 4-51
v1.0, July 2010
capability opaque
Use this command to enable Opaque Capability on the Router. The information contained in
Opaque LSAs may be used directly by OSPF or indirectly by an application wishing to distribute
information throughout the OSPF domain. The 7000 series supports the storing and flooding of
Opaque LSAs of different scopes.
no capability opaque
Use this command to disable opaque capability on the router.
clear ip ospf
Use this command to disable and re-enable OSPF.
clear ip ospf configuration
Use this command to reset the OSPF configuration to factory defaults.
clear ip ospf counters
Use this command to reset global and interface statistics.
Default disabled
Format capability opaque
Mode Router OSPF Config
Format no capability opaque
Mode Router OSPF Config
Format clear ip ospf
Mode Privileged EXEC
Format clear ip ospf configuration
Mode Privileged EXEC
To Next Page
Loading...
