NETGEAR GSM7228PS - Port-Security Max-Dynamic

Managed Switch CLI Manual, Release 8.0.3
Switching Commands 3-167
v1.0, July 2010
port-security
This command enables port locking at the system level (Global Config) or port level (Interface
Config)
.
no port-security
This command disables port locking for one (Interface Config) or all (Global Config) ports.
port-security max-dynamic
This command sets the maximum number of dynamically locked MAC addresses allowed on a
specific port.
no port-security max-dynamic
This command resets the maximum number of dynamically locked MAC addresses allowed on a
specific port to its default value.
Default disabled
Format port-security
Mode • Global Config
• Interface Config
Format no port-security
Mode • Global Config
• Interface Config
Default 600
Format port-security max-dynamic
<maxvalue>
Mode Interface Config
Format no port-security max-dynamic
Mode Interface Config