Managed Switch CLI Manual, Release 8.0.3
Routing Commands 4-5
v1.0, July 2010
no arp retries
This command configures the default ARP count of maximum request for retries.
arp timeout
This command configures the ARP entry ageout time.
The value for <seconds> is a valid positive integer, which represents the IP ARP entry ageout
time in seconds. The range for <seconds> is between 15-21600 seconds.
no arp timeout
This command configures the default ARP entry ageout time.
clear arp-cache
This command causes all ARP entries of type dynamic to be removed from the ARP cache. If the
gateway keyword is specified, the dynamic entries of type gateway are purged as well.
Format no arp retries
Mode Global Config
Default 1200
Format arp timeout <15-21600>
Mode Global Config
Format no arp timeout
Mode Global Config
Format clear arp-cache [gateway]
Mode Privileged EXEC
To Next Page
Loading...
