Managed Switch CLI Manual, Release 8.0.3
IPv6 Multicast Commands 6-26
v1.0, July 2010
The column headings of the table associated with the interface are as follows:
Example: The following shows example CLI display output for the command.
(Switch) #show ipv6 mld-proxy interface
Interface Index................................ 1/0/1
Ver Query Rcvd Report Rcvd Report Sent Leave Rcvd Leave Sent
------------------------------------------------------------------
1 2 0 0 0 2
2 3 0 4 ----- -----
show ipv6 mld-proxy groups
Use this command to display information about multicast groups that the MLD-Proxy reported.
Term Definition
Interface Index The unit/slot/port of the MLD-proxy.
Term Definition
Ver The MLD version.
Query Rcvd Number of MLD queries received.
Report Rcvd Number of MLD reports received.
Report Sent Number of MLD reports sent.
Leaves Rcvd Number of MLD leaves received. Valid for version 2 only.
Leaves Sent Number of MLD leaves sent on the Proxy interface. Valid for version 2 only.
Format show ipv6 mld-proxy groups
Mode • Privileged EXEC
• User EXEC
Field Description
Interface The interface number of the MLD-Proxy.
Group Address The IP address of the multicast group.
To Next Page
Loading...
