NETGEAR GSM7228PS User Manual

Managed Switch CLI Manual, Release 8.0.3
Routing Commands 4-73
v1.0, July 2010
show ip ospf interface
This command displays the information for the IFO object or virtual interface tables.
Opaque Link Number of opaque link LSAs in the database.
Opaque Area Number of opaque area LSAs in the database.
Subtotal Number of entries for the identified area.
Opaque AS Number of opaque AS LSAs in the database.
Total Number of entries for all areas.
Format show ip ospf interface {<unit/slot/port> | loopback <loopback-id> |
vlan <1-4093>}
Mode • Privileged EXEC
• User EXEC
Term Definition
IP Address The IP address for the specified interface.
Subnet Mask A mask of the network and host portion of the IP address for the OSPF interface.
Secondary IP
Address(es)
The secondary IP addresses if any are configured on the interface.
OSPF Admin
Mode
States whether OSPF is enabled or disabled on a router interface.
OSPF Area ID The OSPF Area ID for the specified interface.
OSPF Network
Type
The type of network on this interface that the OSPF is running on.
Router Priority A number representing the OSPF Priority for the specified interface.
Retransmit
Interval
A number representing the OSPF Retransmit Interval for the specified interface.
Hello Interval A number representing the OSPF Hello Interval for the specified interface.
Dead Interval A number representing the OSPF Dead Interval for the specified interface.
LSA Ack Interval A number representing the OSPF LSA Acknowledgment Interval for the specified
interface.
Transit Delay
Interval
A number representing the OSPF Transit Delay for the specified interface.
Authentication
Type
The OSPF Authentication Type for the specified interface are: none, simple, and encrypt.
Term Definition

NETGEAR GSM7228PS Specifications

General

Brand	NETGEAR
Model	GSM7228PS
Category	Switch
Language	English