NETGEAR GSM7228PS - Cos-Queue Min-Bandwidth; Cos-Queue Strict

Managed Switch CLI Manual, Release 8.0.3
Quality of Service (QoS) Commands 8-4
v1.0, July 2010
cos-queue min-bandwidth
This command specifies the minimum transmission bandwidth guarantee for each interface queue.
The total number of queues supported per interface is platform specific. A value from 0-100
(percentage of link rate) must be specified for each supported queue, with 0 indicating no
guaranteed minimum bandwidth. The sum of all values entered must not exceed 100.
no cos-queue min-bandwidth
This command restores the default for each queue's minimum bandwidth value.
cos-queue strict
This command activates the strict priority scheduler mode for each specified queue.
no cos-queue strict
This command restores the default weighted scheduler mode for each specified queue.
Format cos-queue min-bandwidth <bw-0> <bw-1> … <bw-n>
Modes • Global Config
• Interface Config
Format no cos-queue min-bandwidth
Modes • Global Config
• Interface Config
Format cos-queue strict <queue-id-1> [<queue-id-2> … <queue-id-n>]
Modes • Global Config
• Interface Config
Format no cos-queue strict <queue-id-1> [<queue-id-2> … <queue-id-n>]
Modes • Global Config
• Interface Config