Managed Switch CLI Manual, Release 8.0.3
Switching Commands 3-31
v1.0, July 2010
VLAN Commands
This section describes the commands you use to configure VLAN settings.
vlan database
This command gives you access to the VLAN Config mode, which allows you to configure VLAN
characteristics.
network mgmt_vlan
This command configures the Management VLAN ID.
no network mgmt_vlan
This command sets the Management VLAN ID to the default.
Term Definition
VLAN Identifier The VLANs associated with the selected MST instance.
Associated
Instance
Identifier for the associated multiple spanning tree instance or “CST” if associated with
the common and internal spanning tree.
Format vlan database
Mode Privileged EXEC
Default 1
Format network mgmt_vlan <1-4093>
Mode Privileged EXEC
Format no network mgmt_vlan
Mode Privileged EXEC
To Next Page
Loading...
