NETGEAR GSM7228PS - User Max-Input-Octets; User Max-Output-Octets

Managed Switch CLI Manual, Release 8.0.3
Captive Portal Commands 12-28
v1.0, July 2010
no user max-bandwidth-up
Use this command to reset the limit to the default.
user max-input-octets
Use this command to limit the number of octets the user is allowed to transmit. After this limit has
been reached the user will be disconnected. <1-128> is the user ID. The range of octets is 0-
4294967295. 0 indicates to use the global limit.
no user max-input-octets
Use this command to reset the limit to the default.
user max-output-octets
Use this command to limit the number of octets the user is allowed to receive. After this limit has
been reached the user will be disconnected. The <1-128> is the user ID. The range of the octets is
0 – 4294967295. 0 indicates to use the global limit.
Format no user <1-128> max-bandwidth-up
Mode Captive Portal Configuration mode
Default 0
Format user <1-128> max-input-octets octets
Mode Captive Portal Configuration mode
Format no user <1-128> max-input-octets
Mode Captive Portal Configuration mode
Default 0
Format user <1-128> max-output-octets octets
Mode Captive Portal Configuration mode