Managed Switch CLI Manual, Release 8.0.3
Quality of Service (QoS) Commands 8-49
v1.0, July 2010
no auto-voip all
Use this command to disable VoIP Profile on the interfaces of the switch.
auto-voip
Use this command to enable VoIP Profile on the interface.
no auto-voip
Use this command to disable VoIP Profile on the interface.
show auto-voip
Use this command to display the VoIP Profile settings on the interface or interfaces of the switch.
Default disabled
Format auto-voip all
Mode Global Config
Format no auto-voip all
Mode Global Config
Default disabled
Format auto-voip
Mode Interface Config
Format no auto-voip all
Mode Interface Config
Format show auto-voip interface {<unit/slot/port>|all}
Mode Privileged EXEC
To Next Page
Loading...
Need help?
General
