Managed Switch CLI Manual, Release 8.0.3
Utility Commands 9-50
v1.0, July 2010
no service dhcp
This command disables the DHCP server.
ip dhcp bootp automatic
This command enables the allocation of the addresses to the bootp client. The addresses are from
the automatic address pool.
no ip dhcp bootp automatic
This command disables the allocation of the addresses to the bootp client. The address are from the
automatic address pool.
ip dhcp conflict logging
This command enables conflict logging on DHCP server.
Format no service dhcp
Mode Global Config
Default disabled
Format ip dhcp bootp automatic
Mode Global Config
Format no ip dhcp bootp automatic
Mode Global Config
Default enabled
Format ip dhcp conflict logging
Mode Global Config
To Next Page
Loading...
