Managed Switch CLI Manual, Release 8.0.3
Switching Commands 3-99
v1.0, July 2010
no lacp partner admin state individual
Use this command to set the LACP partner admin state to aggregation.
lacp partner admin state longtimeout
Use this command to set LACP partner admin state to longtimeout.
no lacp partner admin state longtimeout
Use this command to set the LACP partner admin state to short timeout.
Note: This command is only applicable to physical interfaces.
Format no lacp partner admin state individual
Mode Interface Config
Format lacp partner admin state longtimeout
Mode Interface Config
Note: This command is only applicable to physical interfaces.
Format no lacp partner admin state longtimeout
Mode Interface Config
Note: This command is only applicable to physical interfaces.
To Next Page
Loading...
