NETGEAR GSM7228PS - Port-Security Mac-Address; Port-Security Max-Static

Managed Switch CLI Manual, Release 8.0.3
Switching Commands 3-168
v1.0, July 2010
port-security max-static
This command sets the maximum number of statically locked MAC addresses allowed on a port .
no port-security max-static
This command sets maximum number of statically locked MAC addresses to the default value.
port-security mac-address
This command adds a MAC address to the list of statically locked MAC addresses. The <vid> is
the VLAN ID.
no port-security mac-address
This command removes a MAC address from the list of statically locked MAC addresses.
Default 20
Format port-security max-static
<maxvalue>
Mode Interface Config
Format no port-security max-static
Mode Interface Config
Format port-security mac-address <mac-address> <vid>
Mode Interface Config
Format no port-security mac-address <mac-address> <vid>
Mode Interface Config