6-1
v1.0, July 2010
Chapter 6
IPv6 Multicast Commands
The IPv6 Multicast commands described in this chapter are standard on the GSM7328Sv2 and
GSM7352Sv2, but are optional on the GSM7328Sv1 and GSM7352Sv1. In order to use these
commands with the GS7328Sv1 or GSM7352Sv1 you must purchase a separate software license.
This chapter contains the following sections:
• “IPv6 Multicast Forwarder” on page 6-2
• “IPv6 PIM-DM Commands” on page 6-4
• “IPv6 PIM-SM Commands” on page 6-8
• “IPv6 MLD Commands” on page 6-16
• “IPv6 MLD-Proxy Commands” on page 6-23
Note: The commands in this chapter require an optional software license for use on the
GSM7328Sv1 and GSM7352Sv1.
Note: There is no specific IP multicast enable for IPv6. Enabling of multicast at global
config is common for both IPv4 and IPv6.
Note: The commands in this chapter are in one of three functional groups:
• Show commands display switch settings, statistics, and other information.
• Configuration commands configure features and options of the switch. For every
configuration command, there is a show command that displays the configuration
setting.
• Clear commands clear some or all of the settings to factory defaults.
To Next Page
Loading...
Need help?
General
