EasyManuals Logo

NETGEAR GSM7228PS User Manual

NETGEAR GSM7228PS
788 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #230 background imageLoading...
Page #230 background image
Managed Switch CLI Manual, Release 8.0.3
Switching Commands 3-194
v1.0, July 2010
dos-control firstfrag
This command enables Minimum TCP Header Size Denial of Service protection. If the mode is
enabled, Denial of Service prevention is active for this type of attack. If packets ingress having a
TCP Header Size smaller then the configured value, the packets will be dropped if the mode is
enabled.The default is disabled. If you enable dos-control firstfrag, but do not provide a
Minimum TCP Header Size, the system sets that value to 20.
no dos-control firstfrag
This command sets Minimum TCP Header Size Denial of Service protection to the default value
of disabled.
dos-control tcpfrag
This command enables TCP Fragment Denial of Service protection. If the mode is enabled, Denial
of Service prevention is active for this type of attack. If packets ingress having IP Fragment Offset
equal to one (1), the packets will be dropped if the mode is enabled.
no dos-control tcpfrag
This command disabled TCP Fragment Denial of Service protection.
Default disabled <20>
Format dos-control firstfrag
[<0-255>]
Mode Global Config
Format no dos-control firstfrag
Mode Global Config
Default disabled
Format dos-control tcpfrag
Mode Global Config
Format no dos-control tcpfrag
Mode Global Config

Table of Contents

Other manuals for NETGEAR GSM7228PS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR GSM7228PS and is the answer not in the manual?

NETGEAR GSM7228PS Specifications

General IconGeneral
BrandNETGEAR
ModelGSM7228PS
CategorySwitch
LanguageEnglish

Related product manuals