NETGEAR GSM7228PS - Ip Igmp-Proxy Reset-Status; Show Ip Igmp-Proxy

Managed Switch CLI Manual, Release 8.0.3
IP Multicast Commands 5-36
v1.0, July 2010
no ip igmp-proxy unsolicit-rprt-interval
This command resets the unsolicited report interval of the IGMP Proxy router to the default value.
ip igmp-proxy reset-status
This command resets the host interface status parameters of the IGMP Proxy router. This
command is valid only when you enable IGMP Proxy on the interface.
show ip igmp-proxy
This command displays a summary of the host interface status parameters. It displays the
following parameters only when you enable IGMP Proxy.
Format no ip igmp-proxy unsolicit-rprt-interval
Mode Interface Config
Format ip igmp-proxy reset-status
Mode Interface Config
Format show ip igmp-proxy
Modes • Privileged EXEC
• User EXEC
Term Definition
Interface index The interface number of the IGMP Proxy.
Admin Mode States whether the IGMP Proxy is enabled or not. This is a configured value.
Operational
Mode
States whether the IGMP Proxy is operationally enabled or not. This is a status
parameter.
Version The present IGMP host version that is operational on the proxy interface.
Number of
Multicast Groups
The number of multicast groups that are associated with the IGMP Proxy interface.
Unsolicited
Report Interval
The time interval at which the IGMP Proxy interface sends unsolicited group membership
report.
Querier IP
Address on
Proxy Interface
The IP address of the Querier, if any, in the network attached to the upstream interface
(IGMP-Proxy interface).