NETGEAR GSM7228PS - Ip Host; Ip Name Server

Managed Switch CLI Manual, Release 8.0.3
Utility Commands 9-57
v1.0, July 2010
no ip domain list
Use this command to delete a name from a list.
ip name server
Use this command to configure the available name servers. Up to eight servers can be defined in
one command or by using multiple commands. The parameter <server-address> is a valid
IPv4 or IPv6 address of the server. The preference of the servers is determined by the order they
were entered.
no ip name server
Use this command to remove a name server.
ip host
Use this command to define static host name-to-address mapping in the host cache. <name> is
host name. <ip address> is the IP address of the host.
Format no ip domain list <name>
Mode Global Config
Format ip name-server <server-address1> [server-address2...server-address8]
Mode Global Config
Format no ip name-server [server-address1...server-address8]
Mode Global Config
Default none
Format ip host <name> <ipaddress>
Mode Global Config