Managed Switch CLI Manual, Release 8.0.3
IP Multicast Commands 5-25
v1.0, July 2010
Designated Router.............................. 41.1.1.2
DR Priority.................................... 1
BSR Border..................................... Disabled
show ip pimsm neighbor
This command displays the neighbor information for PIM-SM on the specified interface.
show ip pimsm rphash
This command displays which rendezvous point (RP) is being used for a specified group.
Format show ip pimsm neighbor {<unit/slot/port> | all}
Modes • Privileged EXEC
• User EXEC
Term Definition
Interface Valid unit, slot, and port number separated by forward slashes.
IP Address The IP address of the neighbor on an interface.
Up Time The time since this neighbor has become active on this interface.
Expiry Time The expiry time of the neighbor on this interface.
Format show ip pimsm rphash <group-address>
Modes • Privileged EXEC
• User EXEC
Term Definition
RP The IP address of the RP for the group specified.
Origin Indicates the mechanism (BSR or static) by which the RP was selected.
To Next Page
Loading...
