Managed Switch CLI Manual, Release 8.0.3
IPv6 Commands 7-32
v1.0, July 2010
clear ipv6 statistics
Use this command to clear IPv6 statistics for all interfaces or for a specific interface, including
loopback and tunnel interfaces. IPv6 statistics display in the output of the show ipv6
traffic command. If you do not specify an interface, the counters for all IPv6 traffic statistics
reset to zero.
ICMPv6 Parameter
Problem Messages
Transmitted
Number of ICMP Parameter Problem messages sent by the interface.
ICMPv6 Packet Too Big
Messages Transmitted
Number of ICMP Packet Too Big messages sent by the interface.
ICMPv6 Echo Request
Messages Transmitted
Number of ICMP Echo (request) messages sent by the interface.ICMP echo
messages sent.
ICMPv6 Echo Reply
Messages Transmitted
Number of ICMP Echo Reply messages sent by the interface.
ICMPv6 Router Solicit
Messages Transmitted
Number of ICMP Router Solicitation messages sent by the interface.
ICMPv6 Router
Advertisement
Messages Transmitted
Number of ICMP Router Advertisement messages sent by the interface.
ICMPv6 Neighbor Solicit
Messages Transmitted
Number of ICMP Neighbor Solicitation messages sent by the interface.
ICMPv6 Neighbor
Advertisement
Messages Transmitted
Number of ICMP Neighbor Advertisement messages sent by the interface.
ICMPv6 Redirect
Messages Received
Number of Redirect messages sent. For a host, this object will always be zero,
since hosts do not send redirects.
ICMPv6 Group
Membership Query
Messages Received
Number of ICMPv6 Group Membership Query messages sent.
ICMPv6 Group
Membership Response
Messages Received
Number of ICMPv6 Group Membership Response messages sent.
ICMPv6 Group
Membership Reduction
Messages Received
Number of ICMPv6 Group Membership Reduction messages sent.
ICMPv6 Duplicate
Address Detects
Number of duplicate addresses detected by the interface.
Term Definition
To Next Page
Loading...
Need help?
General
