Managed Switch CLI Manual, Release 8.0.3
Utility Commands 9-72
v1.0, July 2010
debug ipv6 mcache packet
Use this command for tracing MDATAv6 packet reception and transmission. receive traces only
received data packets and transmit traces only transmitted data packets. When neither keyword is
used in the command, then all data packet traces are dumped. Vital information such as source
address, destination address, packet length, and the interface on which the packet is received or
transmitted is displayed on the console.
no debug ipv6 mcache packet
Use this command to disable debug tracing of MDATAv6 packet reception and transmission.
debug ipv6 mld packet
Use this command to trace MLDv6 packet reception and transmission. receive traces only
received MLDv6 packets and transmit traces only transmitted MLDv6 packets. When neither
keyword is used in the command, then all MLDv6 packet traces are dumped. Vital information
such as source address, destination address, control packet type, packet length, and the interface on
which the packet is received or transmitted is displayed on the console.
no debug ipv6 mld packet
Use this command to disable debug tracing of MLDv6 packet reception and transmission.
Default disabled
Format debug ipv6 mcache packet [receive|transmit]
Mode Privileged EXEC
Format no debug ipv6 mcache packet [receive|transmit]
Mode Privileged EXEC
Default disabled
Format debug ipv6 mld packet [receive|transmit]
Mode Privileged EXEC
To Next Page
Loading...
