Managed Switch CLI Manual, Release 8.0.3
IPv6 Commands 7-17
v1.0, July 2010
no ipv6 nd other-config-flag
This command resets the “other stateful configuration” flag back to its default value in router
advertisements sent from the interface.
ipv6 nd ra-interval
This command sets the transmission interval between router advertisements.
no ipv6 nd ra-interval
This command sets router advertisement interval to the default.
ipv6 nd ra-lifetime
This command sets the value, in seconds, that is placed in the Router Lifetime field of the router
advertisements sent from the interface. The <lifetime> value must be zero, or it must be an
integer between the value of the router advertisement transmission interval and 9000. A value of
zero means this router is not to be used as the default router.
Default false
Format ipv6 nd other-config-flag
Mode Interface Config
Format no ipv6 nd other-config-flag
Mode Interface Config
Default 600
Format ipv6 nd ra-interval-max <4- 1800>
Mode Interface Config
Format no ipv6 nd ra-interval-max
Mode Interface Config
To Next Page
Loading...
