Managed Switch CLI Manual, Release 8.0.3
Switching Commands 3-34
v1.0, July 2010
vlan name
This command changes the name of a VLAN. The name is an alphanumeric string of up to 32
characters, and the ID is a valid VLAN identification number. ID range is 1-4093.
no vlan name
This command sets the name of a VLAN to a blank string.
vlan participation
This command configures the degree of participation for a specific interface in a VLAN. The ID is
a valid VLAN identification number, and the interface is a valid interface number.
Participation options are:
Default • VLAN ID 1 - default
• other VLANS - blank string
Format vlan name <1-4093> <name>
Mode VLAN Config
Format no vlan name <1-4093>
Mode VLAN Config
Format vlan participation {exclude | include | auto} <1-4093>
Mode Interface Config
Participation
Options
Definition
include The interface is always a member of this VLAN. This is equivalent to registration fixed.
exclude The interface is never a member of this VLAN. This is equivalent to registration
forbidden.
auto The interface is dynamically registered in this VLAN by GVRP. The interface will not
participate in this VLAN unless a join request is received on this interface. This is
equivalent to registration normal.
To Next Page
Loading...
