NETGEAR GSM7228PS - Show Ip Igmp Interface Stats

Managed Switch CLI Manual, Release 8.0.3
IP Multicast Commands 5-34
v1.0, July 2010
show ip igmp interface stats
This command displays the IGMP statistical information for the interface. The statistics are only
displayed when the interface is enabled for IGMP.
Source Hosts The list of unicast source IP addresses in the group record of the IGMPv3 Membership
Report with the specified multicast group IP address. This is “-----” for IGMPv1 and
IGMPv2 Membership Reports.
Expiry Time The amount of time remaining to remove this entry before it is aged out. This is “-----” for
IGMPv1 and IGMPv2 Membership Reports.
Format show ip igmp interface stats <unit/slot/port>
Modes • Privileged EXEC
• User EXEC
Term Definition
Querier Status The status of the IGMP router, whether it is running in Querier mode or Non-Querier
mode.
Querier IP
Address
The IP address of the IGMP Querier on the IP subnet to which this interface is attached.
Querier Up Time The time since the interface Querier was last changed.
Querier Expiry
Time
The amount of time remaining before the Other Querier Present Timer expires. If the local
system is the querier, the value of this object is zero.
Wrong Version
Queries
The number of queries received whose IGMP version does not match the IGMP version of
the interface.
Number of Joins The number of times a group membership has been added on this interface.
Number of
Groups
The current number of membership entries for this interface.
Term Definition