NETGEAR GSM7228PS - Port Lacpmode; Port Lacpmode Enable All

Managed Switch CLI Manual, Release 8.0.3
Switching Commands 3-104
v1.0, July 2010
port lacpmode
This command enables Link Aggregation Control Protocol (LACP) on a port.
no port lacpmode
This command disables Link Aggregation Control Protocol (LACP) on a port.
port lacpmode enable all
This command enables Link Aggregation Control Protocol (LACP) on all ports.
no port lacpmode enable all
This command disables Link Aggregation Control Protocol (LACP) on all ports.
Default enabled
Format port lacpmode
Mode Interface Config
Format no port lacpmode
Mode Interface Config
Format port lacpmode enable all
Mode Global Config
Format no port lacpmode enable all
Mode Global Config