3-1
v1.0, July 2010
Chapter 3
Switching Commands
This chapter describes the switching commands available in the managed switch CLI.
The Switching Commands chapter includes the following sections:
• “Port Configuration Commands” on page 3-2
• “show port description” on page 3-9
• “VLAN Commands” on page 3-31
• “Double VLAN Commands” on page 3-46
• “Voice VLAN Commands” on page 3-48
• “Provisioning (IEEE 802.1p) Commands” on page 3-51
• “Protected Ports Commands” on page 3-52
• “Private Group Commands” on page 3-54
• “GVRP Commands” on page 3-59
• “GMRP Commands” on page 3-61
• “Port-Based Network Access Control Commands” on page 3-64
• “Storm-Control Commands” on page 3-78
• “Port-Channel/LAG (802.3ad) Commands” on page 3-90
• “Port Mirroring” on page 3-113
• “Static MAC Filtering” on page 3-115
• “DHCP Snooping Configuration Commands” on page 3-120
• “Dynamic ARP Inspection Commands” on page 3-131
• “IGMP Snooping Configuration Commands” on page 3-139
• “IGMP Snooping Querier Commands” on page 3-148
• “MLD Snooping Commands” on page 3-153
• “MLD Snooping Querier Commands” on page 3-162
To Next Page
Loading...
Need help?
General
