Managed Switch CLI Manual, Release 8.0.3
Management Commands 10-62
v1.0, July 2010
Server Name............................ Default_RADIUS_Server
Host Address........................... 192.168.37.58
Secret Configured...................... No
Message Authenticator ................. Enable
Number of Retransmits.................. 4
Time Duration.......................... 10
RADIUS Accounting Mode................. Disable
RADIUS Attribute 4 Mode................ Enable
RADIUS Attribute 4 Value .............. 192.168.37.60
(Switch) #show radius servers 192.168.37.58
Server Name............................ Default_RADIUS_Server
Host Address........................... 192.168.37.58
Secret Configured...................... No
Message Authenticator ................. Enable
Number of Retransmits.................. 4
Time Duration.......................... 10
RADIUS Accounting Mode................. Disable
RADIUS Attribute 4 Mode................ Enable
RADIUS Attribute 4 Value .............. 192.168.37.60
show radius accounting
This command displays a summary of configured RADIUS accounting servers.
If you do not specify any parameters, then only the accounting mode and the RADIUS accounting
server details are displayed.
Format show radius accounting name [<servername>]
Mode Privileged EXEC
Field Description
servername An alias name to identify the server.
RADIUS Accounting
Mode
A global parameter to indicate whether the accounting mode for all the servers is
enabled or not.
Term Definition
Host Address The IP address of the host.
To Next Page
Loading...
Need help?
General
