NETGEAR GSM7228PS - Crypto Key Generate Dsa; Crypto Key Generate Rsa; Hypertext Transfer Protocol (HTTP) Commands

Managed Switch CLI Manual, Release 8.0.3
Management Commands 10-20
v1.0, July 2010
crypto key generate rsa
Use this command to generate an RSA key pair for SSH. The new key files will overwrite any
existing generated or downloaded RSA key files.
no crypto key generate rsa
Use this command to delete the RSA key files from the device.
crypto key generate dsa
Use this command to generate a DSA key pair for SSH. The new key files will overwrite any
existing generated or downloaded DSA key files.
no crypto key generate dsa
Use this command to delete the DSA key files from the device.
Hypertext Transfer Protocol (HTTP) Commands
This section describes the commands you use to configure HTTP and secure HTTP access to the
switch. Access to the switch by using a Web browser is enabled by default. Everything you can
view and configure by using the CLI is also available by using the Web.
Format crypto key generate rsa
Mode Global Config
Format no crypto key generate rsa
Mode Global Config
Format crypto key generate dsa
Mode Global Config
Format no crypto key generate dsa
Mode Global Config