Managed Switch CLI Manual, Release 8.0.3
Stacking Commands 2-10
v1.0, July 2010
Front Panel Stacking Commands
This section describes the commands you use to view and configure front panel stacking
information.
stack-port
This command sets front panel stacking per port to either stack or ethernet mode.
show stack-port
This command displays summary stack-port information for all interfaces.
For Each Interface:
Model Identifier The model identifier for the supported switch type.
Switch
Description
The description for the supported switch type.
Default stack
Format stack-port <unit/slot/port> [{ethernet | stack}]
Mode Stack Global Config
Format show stack-port
Mode Privileged EXEC
Term Definition
QOS Mode Front Panel Stacking QOS Mode for all Interfaces.
Term Definition
Unit The unit number.
Interface The slot and port numbers.
Term Definition
To Next Page
Loading...
